IMI

Call us on...

01305 260000

The Retrofitting Specialists...

FREE CUSTOMER CAR PARK

navbarTop

Top bar
Top bar
Vehicle Security Alarm Brands

Understanding Vehicle Security

Many new cars are fitted with alarms, immobilisers and other clever devices to improve vehicle security. They both protect your possessions from opportunist thieves and your car itself from being stolen.

But the number of different car alarms and security features on offer, and the corresponding level of protection they give, can be baffling for a new buyer. That’s without even considering the huge number of aftermarket units available.

Thankfully, an institution called Thatcham Research independently rates these different car alarms and immobilisers by category to give consumers a better idea of the role they play.

Officially known as the Motor Insurance Repair Research Centre, the organisation works closely with car companies to set car insurance rates depending on the complexity of security systems, safety and repair costs. To find out what your factory vehicle sucurity systems is like please chick HERE.

Background

Thatcham Category 1 – electronic alarm and immobiliser

Systems that fall into this class are the cleverest and most complex on the market. A Category 1 alarm will feature perimeter and ignition detection, and will incorporate movement or glass break and tilt sensors. There’ll also be a siren powered by its own battery supply that will sound if your car gets broken into.

Immobilisers are also a requirement to pass Category 1 tests and have to be passively set – that means without any action from the driver – while a minimum of two operating systems or one control unit used for normal operation must be isolated.

Background

Thatcham Category 2 – electronic immobiliser

Alarms are not a requirement to be awarded Category 2 Thatcham security status. However, an immobiliser is.

Just like Category 1 systems, a Category 2 device has to isolate at least two circuits or systems, or one vehicle control unit that’s required for the car to run properly. Again, it has to be passively set.

Background

Thatcham Category 2/1 – electronic alarm upgrade

This Category is achieved if upgrade work is carried out on a Category 2 vehicle.

As long as the car has Category 2 security status, adding an alarm with the above facets from Category 1, the car can be upgraded to group 2/1, potentially lowering your vehicle insurance premiums.

Background

Thatcham Category 3 – mechanical immobiliser

Unlike the Categories above, Category 3 immobilisation devices are mechanical, not electric. This means they are physical devices that disrupt how a car operates.

They are generally easy to set and unset, with the rules stating that they have to isolate a minimum of one operating system required for vehicle use. They can be permanently or temporarily installed. Category 3 devices include steering wheel and gear lever locks.

Background

Thatcham Category 4 – wheel locking devices

Most modern cars fitted with alloy wheels benefit from locking wheel nuts. These make it harder for thieves to steal your wheels, as a special key is needed to remove one of the nuts.

They actually count as a Category 4 Thatcham-approved device, which have to be reliable and durable, have a secure key replacement procedure, feature a traceable product and provide resistance to attack.

Background

Thatcham Category 5 – post-theft tracking and recovery systems

These systems can track the whereabouts of a stolen vehicle, but also have the ability to immobilise the car remotely by capping certain engine functions so the car can be shut down. This function is not permitted on Category 6 or 7 systems, though.

Background

Thatcham Category 6 – stolen vehicle tracking

Trackers with this function can track a vehicle, but don’t permit it to be remotely shut down.

Background

Thatcham Category 7 – stolen vehicle location

Similar to the above, immobilisation of the stolen car from a different location is not allowed.

Background

Q class systems – non-categorised aftermarket systems

These can include aftermarket alarms and immobilisers, vehicle marking features, data recorders, vehicle ID and signalling systems and improved door locks that have not been approved by Thatcham. The higher Thatcham rating the security systems on your vehicle possess, the more your insurance could come down, as your car should prove harder to steal or break in to.

Background

Alarm Features

There are a lot of features that can be added to an alarm system, for example a level referance monitor will adjust itself to the angle of the vehicle when the system is armed and if the vehicle if moved the system will sound.

Glass smash sensors, proximity sensors, gas sensors for mororhomes can all be added into your system. Even dead bolts can be added into your system giving you secure locking onto your vehicle.

There are also wireless sensors that can be used on trailers, caravans or even shelds. These will work when you park your vehicle near your trailer, caravan or shed and arm the vehicles system, it will then recognise that there is an aditional sensor so if the trailer, caravan or shed is moved or broken into, the vehicle alarm will sound.

Background

24 Volt Systems

We also offer 24 volt versons of the systems above for your vehicle, lorry or bus.

Background

Locks 4 Vans

Locks for Vans are class leading Slamlocks and Deadlocks. The cylinders are made by Assa Abloy the largest lock manufacturer in the world. The quality of production was deemed “very high” by the MIRRC at Thatcham. The cylinders are manufactured exclusively to our demanding specification. In addition, a limpet type lock is in its final stage of development. The product has been designed to address our take on the shortcomings of this type of product. Also available are a lock repair module, electronic locks and a roller shutter lock. Cable rather than rods are utilised in the Slamlock kits, which are vehicle and door specific.

Background

Car Radios (Dorchester) Ltd - all right reserved - Copyright © 2015 - Site Map - TinPotMedia

Valid XHTML 1.0 Strict